成都百川电子有限公司

Chengdu Baichuan Electronics Co.,Ltd

Products

Your location:Home>Products>LPG reducer

motocycle LPG pressure reducer

The lpg reducer has an integrated inlet filter, and it has been designed to maintain a constant injection pressure with different flows required by the engine.

It has been tested on vehicles at environmental temperatures from -10 °C to +40°C. With lower or higher temperatures, the reducer may not guarantee the correct gas flow in all the working conditions required by the engine.


 
The outgoing pressure is adjustable from 1 to 2.5 bar (pressures referred to a reducer not connected to the engine), this pressure range is to be intended relative to the pressure of the engine manifold when MAP is connected.
 

Product introduction

LPG LVT Single Point System Reducer / Regulator
Max inlet gas pressure
25Mpa
Max working pressure
20Mpa
2nd stage output pressure
0.11Mpa
Working temperature
-40℃~+120℃
Material
Alumnium
Working voltage
12V or 24V
Max flow
≥25 nm³/h
Certificate
ISO9001, BV, GOST, R110,ECE